To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCF913 and is the answer not in the manual?
General| Type | Impact Driver |
|---|---|
| Voltage | 20V MAX* |
| Max Torque | 1, 500 in-lbs |
| No Load Speed | 0-3, 200 RPM |
| Battery Type | 12V MAX Lithium-Ion |
| LED Light | Yes |
| Anvil Type | Detent Pin |
| Tool Length | 5.5 inches |
| Tool Weight | 3.4 lbs |
| Chuck Size | 1/2 inch |
| Drive Size | 1/2 inch |
| Impacts/min | 0-3, 700 IPM |
| No Load Speed (RPM) | 0-2500 RPM |
| Tool Height | 8.25 in |
| No Load Impacts Per Minute | 0-3, 700 IPM |
| Chuck Type | 1/2 in Detent Pin |
Defines DANGER and WARNING safety alert symbols and their implications.
Covers safety for work area, electrical hazards, and personal operational safety.
Proper use, care, and maintenance procedures for power tools.
Guidelines for using and caring for battery-powered tools.
Essential safety measures for impact wrench operation, including handling and noise.
Additional safety considerations for impact wrenches, including eye protection and vibration.
Critical safety guidelines for battery packs regarding use, charging, and storage.
Critical safety guidelines for battery chargers regarding use and maintenance.
Procedures for charging, temperature limits, and hot/cold pack delay.
