Need help?Do you have a question about the DeWalt DCF921 and is the answer not in the manual?
General| Max Torque (ft-lbs) | 300 ft-lbs |
|---|---|
| Max Torque (Nm) | 406 Nm |
| Breakaway Torque (ft-lbs) | 450 ft-lbs |
| Breakaway Torque (Nm) | 610 Nm |
| Anvil Type | Detent Pin |
| LED Light | Yes |
| Variable Speed | Yes |
| Voltage | 20V MAX |
| Drive Size | 1/2 inch |
| No Load Speed | 2500 RPM |
| Tool Height | 8.25 in |
To Next Page
