DeWalt DCM561P1 - Important Safety Instructions for All Battery Chargers; User Safety and Risks; Safety of Others; Residual Risks

7
English
Switch the tool off. Before performing
any maintenance on the tool, remove the
battery from the tool.
92
Beware of flying objects. Keep
bystanders away from the cutting area.
92
Do not expose the appliance to rain or
high humidity
92
Directive 2000/14/EC guaranteed sound
power.
DATE CODE POSITION (FIG. 19)
The date code (ff), which also includes the year of
manufacture, is printed into the housing.
Example:
2015 XX XX
Year of Manufacture
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual
contains important safety and operating
instructions for compatible battery chargers (refer to
TechnicalData).
• Before using charger, read all instructions and
cautionary markings on charger, battery pack,
and product using battery pack.
WARNING: Shock hazard. Do
not allow any liquid to get inside charger.
Electric shock may result.
WARNING: We recommend the
use of a residual current device with a
residual current rating of 30mA or less.
CAUTION: Burn hazard. To
reduce the risk of injury, charge only
DeWALT rechargeable batteries. Other
types of batteries may burst causing
personal injury and damage.
CAUTION: Children should be
supervised to ensure that they do not
play with the appliance.
NOTICE: Under certain conditions,
with the charger plugged into the power
supply, the exposed charging contacts
inside the charger can be shorted by
foreign material. Foreign materials of
or restrained to prevent movement following
sudden changes in speed or direction.
• When not in use, the appliance should be
stored in a dry, well ventilated place out of reach
of children.
• Children should not have access to stored
appliances.
Safety of Others
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
• Children must be supervised to ensure that they
do not play with the appliance.
Residual Risks
Additional residual risks may arise when using the
tool which may not be included in the enclosed
safety warnings. These risks can arise from misuse,
prolonged use etc.
Even with the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks can not be avoided.
These include:
• Injuries caused by touching any rotating/moving
parts.
• Injuries caused when changing any parts,
blades or accessories.
• Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust
developed when using your tool (example: working
with wood, especially oak, beech and MDF.)
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
95
Wear ear protection.
95
Wear eye protection.