6
English
•  Only use the appliance in the upright position, with the 
cutting line near the ground. Never switch the appliance 
on in any other position.
•  Move slowly when using the appliance. Be aware that 
freshly cut grass is damp and slippery.
•  Do not work on steep slopes. Work across the face of 
slopes, not up and down.
•  Never cross gravel paths or roads while the appliance is 
running.
•  Never touch the cutting line while the appliance is running.
•  Do not put the appliance down until the cutting line has 
come to a complete standstill.
•  Use only the appropriate type of cutting line. Never use 
metal cutting line or fishing line.
•  Keep hands and feet away from the cutting line and blade 
at all times, especially when switching on the motor.
•  Before using the appliance and after any impact, check for 
signs of wear or damage and repair as necessary.
•  Take care against injury from any device fitted for 
trimming the filament line length. After extending new 
cutter line always return the machine to its normal 
operating position before switching on.
•  Close supervision is necessary when the appliance is used 
near children.
•  This appliance is not intended for use by young or infirm 
persons without supervision.
•  This appliance is not to be used as a toy.
•  Use in a dry location only. Do not allow the appliance to 
become wet.
•  Do not immerse the appliance in water.
•  Do not open the body casing. There are not user-
serviceable parts inside
•  Do not operate the appliance in explosive atmospheres, 
such as in the presence of flammable liquids, gases or dust.
•  When the appliance is stored or transported in a vehicle 
it should be placed in the boot or restrained to prevent 
movement following sudden changes in speed or direction.
•  When not in use, the appliance should be stored in a dry, 
well ventilated place out of reach of children.
•  Children should not have access to stored appliances.
Safety of Others
•  This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental 
capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety.
•  Children must be supervised to ensure that they do not 
play with the appliance.
b )  Avoid using the machine in bad weather conditions 
especially when there is a risk of lightning.
c )  Use the machine only in daylight or good artificial light.
d )  Never operate the machine with damaged guards or 
shields or without guards or shields in place.
e )  Switch on the motor only when the hands and feet are 
away from the cutting means.
f )  Always disconnect the machine from the power 
supply (i.e. remove the plug from the mains, remove 
the disabling device or removable battery)
 ʵ whenever the machine is left unattended;
 ʵ before clearing a blockage;
 ʵ before checking, cleaning or working on the machine;
 ʵ after striking a foreign object;
 ʵ whenever the machine starts vibrating abnormally.
g )  Take care against injury to feet and hands from the 
cutting means.
h )  Always ensure that the ventilation openings are kept 
clear of debris.
i )  When using the brush cutter there is a risk of 
kickback if it contacts a solid object (tree trunk, 
branch, or rock). The unit will kick to the opposite 
direction of the brush cutter blade's rotation.
j )  Remove any objects that may cause kickback, such as 
branches and rocks.
k )  Check for loose fasteners and damaged parts, such as 
cracks in the cutting attachment.
Maintenance and storage
a )  Disconnect the machine from the power supply 
(i.e. remove the plug from the mains, remove the 
disabling device or removable battery) before carrying 
out maintenance or cleaning work.
b )  Use only the manufacturer’s recommended 
replacement parts and accessories.
c )  Inspect and maintain the machine regularly. Have 
the machine repaired only by an authorized repairer.
d )  When not in use, store the machine out of the reach 
of children.
e )  Use blade cover for metal blades during transport and 
storage.
f )  Clean before storing, including the use of guards on 
cutting attachments with metal blades.
ADDITIONAL SAFETY INSTRUCTIONS FOR 
GRASS TRIMMERS / BRUSH CUTTERS
 
WARNING: Cutting elements continue to rotate 
after the motor is switched off.
•  Wear long trousers to protect your legs.
•  Before using the appliance, check that your cutting path is 
free from sticks, stones, wire and any other obstacles.