DeWalt DCM575 User Manual

4
ENGLISH
EC-Declaration of Conformity
Machinery Directive
54V Chainsaw
DCM575
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-
13:2009+A1:2010.
2000/14/EC , Annex V DEKRA Certification B.V., Meander 1051 /
P.O. Box 5185 6825 MJ ARNHEM / 6802 ED
ARNHEM
Netherlands
Notified Body ID No.: 0344
L
PA
(measured sound pressure level) 80.5 dB(A)
uncertainty (K) = 3,0 dB (A)
L
WA
(guaranteed sound power) 103 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT.
Markus Rompel
Director Engineering
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
12.12.2016
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make
DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCM575
Voltage V
DC
54
UK & Ireland V
DC
54
Battery type Li-Ion
Bar Length cm 40
Maximum Chain Speed (no-load) m/s 15
Maximum Cutting Length cm 40
Oil Capacity ml 115
Weight (without battery pack) kg 4.4
Noise values and vibration values (triax vector sum) according to EN60745-2-
13:2009+A1:2010:
L
PA
(emission sound pressure level) dB(A) 80.5
L
WA
(sound power level) dB(A) 100.5
K (uncertainty for the given sound level) dB(A) 3
Vibration emission value a
h
= m/s
2
3.5
Uncertainty K = m/s
2
1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
Fuses:
Europe 230V tools 10 Amperes. mains
U.K. & Ireland 230V tools 3 Amperes. in plugs
English (original instructions)
54V CHAINSAW
DCM575

DeWalt DCM575 Specifications

General

Brand	DeWalt
Model	DCM575
Category	Chainsaw
Language	English