DeWalt DCMST561 User Manual

7
ENGLISH
Safety Instructions

WARNING: When using mains-powered appliances,
basic safety precautions, including the following, should
always be followed to reduce the risk of fire, electric shock,
personal injury and materialdamage.

WARNING: When using the machine the safety rules
must be followed. For your own safety and bystanders
please read these instructions before operating the
machine. Please keep the instructions safe for lateruse.
• Read all of this manual carefully before operating
theappliance.
• The intended use is described in this manual. The use of any
accessory or attachment or the performance of any operation
with this appliance other than those recommended in this
instruction manual may present a risk of personalinjury.
• Retain this manual for futurereference.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe Operating Practices
Training
a ) Read the instructions carefully. Be familiar with the
controls and the correct use of themachine.
b ) Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of theoperator.
c ) Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
theirproperty.
Preparation
a ) Before use, always visually inspect the machine for
damaged, missing or misplaced guards orshields.
b ) Never operate the machine while people, especially
children, or pets arenearby.
Operation
a ) Wear eye protection and stout shoes at all times
while operating themachine.
b ) Avoid using the machine in bad weather conditions
especially when there is a risk oflightning.
c ) Use the machine only in daylight or good
artificiallight.
d ) Never operate the machine with damaged guards or
shields or without guards or shields inplace.
e ) Switch on the motor only when the hands and feet
are away from the cuttingmeans.
f ) Do not overreach, keep your balance at all times,
always be sure of your footing on slopes. Always
walk, neverrun.
g ) Always disconnect the machine from the power
supply (i.e. remove the plug from the mains, remove
the disabling device or removable battery)
• whenever the machine is left unattended;
• before clearing a blockage;
• before checking, cleaning or working on the machine;
• after striking a foreign object;
• whenever the machine starts vibratingabnormally.
h ) Take care against injury to feet and hands from the
cuttingmeans.
i ) Always ensure that the ventilation openings are kept
clear ofdebris.
Maintenance and storage
a ) Disconnect the machine from the power supply
(i.e. remove the plug from the mains, remove the
disabling device or removable battery) before
carrying out maintenance or cleaningwork.
b ) Use only the manufacturer’s recommended
replacement parts andaccessories.
c ) Inspect and maintain the machine regularly. Have the
machine repaired only by an authorizedrepairer.
d ) When not in use, store the machine out of the reach
ofchildren.
Additional Safety Instructions for
GrassTrimmers

WARNING: Cutting elements continue to rotate after the
motor is switchedoff.
• Wear long trousers to protect yourlegs.
• Before using the appliance, check that your cutting path
is free from sticks, stones, wire and any otherobstacles.
• Only use the appliance in the upright position, with the
cutting line near the ground. Never switch the appliance on
in any otherposition.
• Move slowly when using the appliance. Be aware that
freshly cut grass is damp andslippery.
• Do not work on steep slopes. Work across the face of slopes,
not up anddown.
• Never cross gravel paths or roads while the appliance
isrunning.
• Never touch the cutting line while the appliance
isrunning.
• Do not put the appliance down until the cutting line has
come to a complete standstill.
• Use only the appropriate type of cutting line. Never use
metal cutting line or fishingline.
• Be careful not to touch the line trimmingblade.
• Keep hands and feet away from the cutting line at all
times, especially when switching on themotor.
• Before using the appliance and after any impact, check
for signs of wear or damage and repair asnecessary.
• Take care against injury from any device fitted for
trimming the filament line length. After extending new
cutter line always return the machine to its normal operating
position before switchingon.
• Close supervision is necessary when the appliance is
used nearchildren.

DeWalt DCMST561 Specifications

General

Power Source	Battery
Battery Type	Lithium-Ion
Voltage	18V
Weight	3.5 kg
Battery Included	Yes
Charger Included	Yes
Line Diameter	2.0 mm