Need help?Do you have a question about the DeWalt DCN680N and is the answer not in the manual?
General| Type | Brad Nailer |
|---|---|
| Battery Voltage | 18V |
| Power Source | Cordless |
| Magazine Capacity | 110 Nails |
| Depth Adjustment | Yes |
| Tool-Free Jam Release | Yes |
| Voltage | 18V |
| Fastener Type | Brad Nails |
| Operating Mode | Sequential or Bump |
| Nail Gauge | 18-gauge |
Safety measures for the work environment, covering lighting and explosive atmospheres.
Guidelines for safe electrical connections and usage of power tools.
Measures to ensure operator alertness, proper attire, and safe handling.
Proper methods for using and maintaining power tools to ensure safety.
Instructions for the safe operation and maintenance of battery-powered tools.
Recommendations for professional servicing and repair of power tools.
Essential safety rules to prevent injury when operating the nailer.
Further critical safety advice specific to nailer operation.
Explanation of sequential and bump actuation modes and their operation.
Steps to take before operating the nailer, ensuring readiness and safety.
Guidance on engaging the trigger lock-off for enhanced safety.
Step-by-step instructions for correctly loading fasteners into the nailer.
Potential risk of hearing damage from prolonged tool use.
Risk of injury from projectiles generated during operation.
Risk of burns from hot components or accessories.
Risk of injury associated with extended periods of tool operation.
Safety requirements for connecting and using the charger.
Instructions for fitting a new mains plug in specific regions.
Advice on selecting and safely using extension cords with the charger.
Critical safety rules to follow when operating DEWALT battery chargers.
Warnings regarding charger usage, exposure, and potential hazards.
Guidance on environmentally responsible disposal of products and batteries.
Information on using recommended accessories for the tool.
Instructions for attaching, removing, and repositioning the belt hook.
Step-by-step guide for installing and removing the battery pack.
Explanation of the fuel gauge feature on DEWALT battery packs.
General guidelines for operating the tool safely and effectively.
Recommended hand placement for safe and controlled tool operation.
Detailed steps for using sequential actuation mode for precise nailing.
Detailed steps for using bump actuation mode for rapid nailing.
Indicator for low battery status via headlight flashing.
Indicator for jammed nails via continuous headlight flashing.
Information regarding the tool's lubrication requirements.
Instructions for cleaning the tool and its components.
To Next Page
