DeWalt DCN695 - Page 41

39
ENGLISH
English (original instructions)
18V XR LI-ION CORDLESS FRAMING NAILER
DCN692, DCN695
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DCN692 DCN695
Voltage V
DC
18 18
Type 2 2
Actuating mode Sequential/ Bump RapidCycle Sequential/Sequential
Magazine angle 33° 33°
Fasteners
length mm 50–90 50–90
shank diameter mm 2.8–3.3 2.8–3.3
angle 30–34° 30–34°
head geometry clipped or offset round clipped or offset round
collation type paper or wire weld paper or wire weld
Weight (without battery pack) kg 3.63 3.63
Drive energy J 105 105
Noise and vibration total values (triax vector sum) according to EN 60745-2-16
L
PA
(sound pressure) dB(A) 82 83
L
WA
(sound power) dB(A) 93 94
K
WA
(uncertainty for the given sound level) dB(A) 3 3
Vibration emission value a
h
= m/s² 2.5 2.5/3.3
Uncertainty K = m/s² 1.5 1.5
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for
different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure level over the total workingperiod.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of workpatterns.
Batteries
Chargers/Charge Times (Minutes)
Cat #
DC
Weight
Batteries Chargers/Charge Times (Minutes)
Cat # V
DC
Ah Weight (kg) DCB107 DCB113 DCB115 DCB118 DCB132 DCB119
DCB546 18/54 6.0/2.0 1.05 270 140 90 60 90 X
DCB547 18/54 9.0/3.0 1.25 420 220 140 85 140 X
DCB181 18 1.5 0.35 70 35 22 22 22 45
DCB182 18 4.0 0.61 185 100 60 60 60 120
DCB183/B 18 2.0 0.40 90 50 30 30 30 60
DCB184/B 18 5.0 0.62 240 120 75 75 75 150
DCB185 18 1.3 0.35 60 30 22 22 22 X
DCB187 18 3.0 0.48 140 70 45 45 45 90