Need help?Do you have a question about the DeWalt DCS335N and is the answer not in the manual?
General| Model | DCS335N |
|---|---|
| Type | Jigsaw |
| Power Source | Cordless |
| Battery Voltage | 18V |
| Stroke Length | 26 mm |
| Bevel Capacity | 45° |
| Variable Speed | Yes |
| Blade Change | Tool-free |
| LED Light | Yes |
| No Load Speed | 0-3200 SPM |
| Battery Type | Li-ion |
| Oscillation Angle | 3.0° |
| Strokes per Minute/Oscillations Per Minute (OPM) | 0-3200 OPM |
Detailed specifications for DCS334 and DCS335 models.
Statement of compliance with EU directives.
Explains safety signal words and symbols.
Guidelines for maintaining a safe work environment.
Precautions regarding electrical hazards.
Measures to ensure operator safety.
Guidance on operating and maintaining power tools.
Instructions for using and caring for battery packs.
Information on tool servicing and repair.
Essential safety practices for jigsaw operation.
Potential risks such as hearing loss, dust inhalation, and injury.
Instructions for replacing the mains plug in UK/Ireland.
Guidance on using extension cables with the charger.
Key safety guidelines for battery chargers.
Step-by-step guide to charging a battery.
Explanation of charger indicators and operation.
How the charger handles battery temperature during charging.
How the tool's protection system works.
Instructions for mounting the charger on a wall.
Safety precautions for cleaning the charger.
Key safety guidelines for battery packs.
Guidelines and warnings for transporting batteries.
Details on FLEXVOLT battery use and transport modes.
Advice on optimal storage conditions for battery packs.
Explanation of symbols and labels on tools and chargers.
Explanation of pictograms found on the tool.
Location and explanation of the date code.
Identification of tool parts with numerical labels.
Specifies the intended applications for the jig saws.
How to use the lock-off button and variable speed trigger.
How to use the on/off switch on the DCS335 model.
Instructions for installing and removing the battery pack.
Explanation of the battery fuel gauge indicator.
Steps for installing and removing jig saw blades.
Procedure for adjusting the shoe angle.
How to adjust the orbital action lever for different cuts.
How the dust blower clears debris.
Steps for attaching dust extraction accessories.
Instructions for using the anti-scratch shoe cover.
Guidance on using the anti-splinter insert.
How to set the sawing speed on the DCS334.
How to set the sawing speed on the DCS335.
Information on the tool's worklights.
Ensure the battery pack is fully charged before use.
General operating instructions and safety precautions.
Technique for performing flush cuts with the jig saw.
Guidelines for cutting wood with the jig saw.
Techniques for cutting various metal materials.
Correct hand placement for safe operation.
Method for making internal cuts without pilot holes.
Information on maintaining and cleaning the power tool.
Procedure for lubricating the guide roller.
Safety and methods for cleaning the tool.
Information on optional accessories for the tool.
Guidance on proper disposal and recycling of products.
Instructions for handling battery packs at end of technical life.
To Next Page