DeWalt DCS354B - Page 3

1
ENGLISH
English (original instructions)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
If you have any questions or comments about this or
any product, call
DeWALT
toll free at:
(1-800-433-9258).
1
Variable speed trigger
2
LED worklight
3
Accessory clamp lever
4
Lock on/off button
5
Accessory side mount
6
Cut guide block
(Optional Accessory)
7
Cut guide arm (Optional
Accessory)
8
Battery pack
9
Battery release button
10
Mode selector (DCS356)
Fig. A
8
9
4
1
3
5
2
10
DCS356
DCS354
6
7