DeWalt DCS356 Instruction Manual

1
ENGLISH
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
1
Variable speed trigger
2
LED worklight
3
Accessory clamp lever
4
Lock on/off button
5
Accessory side mount
6
Cut guide block
(Optional Accessory)
7
Cut guide arm (Optional
Accessory)
8
Battery pack
9
Battery release button
10
Mode selector (DCS356)
Fig. A
8
9
4
1
3
5
2
10
DCS356
DCS354
6
7

DeWalt DCS356 Specifications

General

Motor Type	Brushless
Oscillations Per Minute	0-20, 000 OPM
Variable Speed Control	Yes
Tool-Free Accessory Change	Yes
Power Source	Cordless
Voltage	20V
Quick Change Accessory System	Yes
Type	Oscillating Multi-Tool
Oscillation Angle	1.6 degrees
Variable Speed Trigger	Yes
Battery Type	Lithium-Ion
Battery System	20V MAX
Tool Weight	2.33 lbs