Need help?Do you have a question about the DeWalt DCS388 and is the answer not in the manual?
General| Type | Reciprocating Saw |
|---|---|
| Power Source | Battery |
| Voltage | 20V |
| Strokes per Minute | 0-3000 SPM |
| No Load Speed | 0-3000 spm |
| Blade Clamp | Keyless |
| LED Light | Yes |
| Stroke Length | 1-1/8 inch |
Provides detailed technical specifications for the tool and battery pack.
Lists sound pressure and vibration emission levels as per EN60745.
Declares product compliance with relevant EU directives and standards.
Explains the severity levels associated with safety signal words.
Comprehensive safety warnings applicable to all power tools.
Guidelines for maintaining a safe and organized work environment.
Critical safety advice regarding electrical hazards and tool usage.
Essential personal safety practices for tool operators.
Advice on proper usage, maintenance, and general care of the tool.
Instructions for the safe use and maintenance of battery-powered tools.
Guidelines for ensuring the tool is serviced by qualified personnel.
Procedures for safely operating the power switch.
Best practices and safety tips for effective sawing operations.
How to inspect, install, and remove saw blades safely.
Identifies inherent risks that may persist despite safety measures.
Further information on the tool's electrical design and safety.
Specific instructions for replacing the mains plug in the UK and Ireland.
Guidance on selecting and using extension cords with chargers.
Overview of DEWALT chargers and their ease of use.
Crucial safety precautions for operating DEWALT battery chargers.
Step-by-step guide for correctly charging the battery pack.
Explains how to interpret charger indicators for battery status.
Describes the charger's delay feature for optimal battery temperature.
Details the tool's system for protecting the battery pack.
Instructions on how to securely mount the charger on a wall.
Safety warnings and procedures for cleaning the charger.
General information and ordering details for battery packs.
Essential safety guidelines for all DEWALT battery packs.
Step-by-step guide for inserting the battery into the tool handle.
Instructions for safely detaching the battery pack from the tool.
Explains how to use the fuel gauge to check battery charge level.
Details the functionality and use of the variable speed trigger.
How to use the lock-off button to prevent accidental starting.
Information about the integrated worklight and its operation.
Explains how the indicator signals the battery's charge status.
General overview of how to operate the cordless reciprocating saw.
Key instructions for safe and effective tool operation.
Recommended hand placement for safe and stable tool control.
Detailed procedures for changing the saw blade.
Guidelines and safety advice for performing cutting tasks.
Specific instructions for performing pocket and plunge cuts in wood.
Advice and techniques for cutting various metal materials.
General guidance on maintaining the power tool for longevity.
Information regarding the lubrication needs of the power tool.
Instructions and warnings for safely cleaning the tool.
Recommendations on using DEWALT-approved accessories.
Guidance on proper disposal of tools and batteries.
Advice on battery recharge timing and end-of-life disposal.
To Next Page
