Need help?Do you have a question about the DeWalt DCS777 and is the answer not in the manual?
General| Blade Diameter | 216 mm |
|---|---|
| Power Source | Cordless |
| Battery Voltage | 54V |
| No Load Speed | 6300 RPM |
| Bevel Capacity | 48° |
| Arbor Size | 30 mm |
| Max Cut Depth at 45 Degrees | 48 mm |
| Weight | 14 kg |
| Max Cutting Capacity at 90°/90° | 270 mm x 62 mm |
| Max Cutting Capacity at 45°/90° | 190 mm x 62 mm |
| Max Cutting Capacity at 90°/45° | 270 x 48 mm |
| Type | Sliding Compound Mitre Saw |
Details on voltage, power, dimensions, and capacities.
Table of compatible batteries and charging times.
Explains severity levels for warning symbols.
Essential warnings for safe operation.
Maintaining a safe environment and personal practices.
Guidelines for operating and maintaining the tool and batteries.
Specific safety precautions for mitre saw use.
Ensuring stability and preventing movement during cuts.
Proper methods to avoid accidents during sawing.
Ensuring the machine is ready and safe before use.
Specific safety rules for operating this type of saw.
Ensuring correct blade use and guard functionality.
Safe operation and electrical hazard awareness.
Inherent dangers of using the saw despite safety measures.
Precautions for charger use, maintenance, and mounting.
Steps for charging and understanding indicators.
Electronic protection for battery longevity and tool safety.
Precautions for safe use and potential risks.
Guidelines for shipping and storing batteries safely.
Understanding safety pictographs on devices.
Specifies voltage, temperature ranges, and usage.
List of all items included with the saw.
Identification of parts and safety symbols.
Applications and basic assembly overview.
Assembling handles and managing battery packs.
Secure mounting and safe carrying procedures.
Steps for changing blades and aligning components.
Ensuring the fence is square to the blade.
Ensuring the blade is perpendicular to the table.
Setting the precise bevel angle.
Ensuring safe setup before use.
Operating controls and worklight system.
Performing angled cuts on workpieces.
Tips for smooth cuts and secure workpieces.
Combining mitre and bevel cuts for frames.
Connecting and using dust extraction systems.
Ensuring tool longevity and proper function.
Using recommended accessories and selecting blades.
Recycling products and batteries responsibly.
Recharging and end-of-life disposal instructions.
To Next Page
