To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCS387 and is the answer not in the manual?
General| Power source | Battery |
|---|---|
| Battery voltage | 18 V |
| Battery capacity | 4 Ah |
| Battery charger included | Yes |
| Stroke rate (1st gear) | 0 spm |
| Stroke rate (2nd gear) | 2900 spm |
| Product color | White, Yellow |
| Stroke length | 29 mm |
Weight and Dimensions| Depth | 363 mm |
|---|---|
| Height | 203 mm |
| Weight | 2300 g |
Explains DANGER, WARNING, CAUTION, NOTICE for hazard identification.
Core safety advice for work area, electrical, and general tool use.
Guidance on holding, positioning, and securing the saw during cuts.
Managing risks from vibration and using necessary personal protective equipment.
Awareness of dust hazards and chemical exposure during operation.
Explains common symbols found on the tool label.
Important safety guidelines for all DEWALT battery packs.
Specific safety rules for handling and disposing of Li-Ion battery packs.
Information about the Rechargeable Battery Recycling Corporation seal.
Essential safety precautions for using DEWALT battery chargers.
Safe operation, extension cord selection, and handling of charger cords.
Step-by-step guide for inserting and charging battery packs.
Explains the meaning of indicator lights during charging.
Details how the charger signals charging status and potential problems.
Charger behavior with hot/cold batteries and indications for weak/faulty packs.
Guidance on wall mounting chargers and important charging tips.
Best practices for storing battery packs for optimal performance.
Identifies and labels the key parts of the tool.
Advice on staying alert, using PPE, and preventing accidental starts.
Proper usage, maintenance, and storage of power tools.
Safe handling and maintenance of battery-powered tools.
Explains the operation of the variable speed trigger and lock-off button.
Step-by-step instructions for fitting and removing the battery pack.
Details on how to check the remaining charge on battery packs.
Step-by-step guide for inserting and securing the saw blade.
How to use the horizontal blade orientation for tight spaces.
Procedure for safely detaching the saw blade from the tool.
Essential safety precautions, techniques, and grip advice for cutting.
Warnings and guidance for overhead cutting and cutting into unknown areas.
Technique for cutting close to floors, corners, and other confined areas.
Method for starting cuts within a workpiece without drilling a pilot hole.
Guidance on cutting various metals with appropriate blades and techniques.
Instructions for cleaning the tool's air vents and exterior parts.
How to safely clean the battery charger.
Information on recommended accessories and their use.
Details on tool repairs, service centers, and warranty coverage.
Benefits and process for registering the product online.
How to obtain replacement warning labels for the tool.
