Need help?Do you have a question about the DeWalt DCS377 and is the answer not in the manual?
Explains the meaning of hazard signal words like DANGER, WARNING, CAUTION, NOTICE.
Covers keeping the work area clean, well-lit, and free from distractions.
Details precautions for power tool plugs, body contact with grounded surfaces, and avoiding wet conditions.
Emphasizes staying alert, using PPE, preventing unintentional starts, and proper dressing.
Instructions on not forcing tools, using correct tools, and proper maintenance.
Guidelines for recharging, using correct battery packs, and handling battery packs.
Recommendations for qualified repair persons and servicing of battery packs.
Identifies inherent risks like touching rotating parts, finger pinching, and dust exposure.
Information on charger adjustment, electrical safety, and plug replacement.
Critical safety advice for using and maintaining battery chargers.
Step-by-step guide for inserting and charging battery packs.
Explains charge indicators, hot/cold pack delay, and fan operation.
Details the tool's protection against overloading, overheating, and deep discharge.
Instructions on how to mount the charger securely on a wall.
Safety precautions and methods for cleaning the charger.
Crucial safety guidelines for handling, storing, and charging battery packs.
Safety advice for transporting batteries, including regulations and packaging.
Guidance on storing battery packs for optimal performance and life.
Guidance on proper disposal and recycling of batteries and the tool.
Instructions for recharging and end-of-life handling of battery packs.
Explains pictographs found on charger and battery pack labels.
Describes pictograms and symbols found on the power tool itself.
Indicates where to find the date code and year of manufacture on the tool.
Provides a numbered list of tool components shown in Figure A.
Specifies the intended professional use of the band saw for cutting metal.
Detailed steps for installing and removing the saw blade, including safety precautions.
Explains how to adjust the blade tracking mechanism for proper alignment.
Guidance on choosing the correct band saw blade based on material and tooth count.
General safety instructions and precautions before operating the tool.
Step-by-step instructions for installing and removing the battery pack.
Explains the function and interpretation of the battery fuel gauge.
Illustrates and emphasizes the correct and safe way to hold the tool.
Instructions on how to perform cutting operations safely and effectively.
Provides recommendations for optimizing cutting performance and blade life.
Visual guide showing correct and incorrect positions for cutting various materials.
Information about the optional Tool Connect™ Chip for inventory management.
Guidance on proper disposal and recycling of batteries and the tool.
Instructions for recharging and end-of-life handling of battery packs.
To Next Page
General
