DeWalt DCS373 User Manual

DCS373
20V Max* 5-1/2" (140 mm) Cordless Metal-Cutting Circular Saw
Scie circulaire à métaux sans fil, 140mm (5-1/2po) 20V max*
Sierra circular inalámbrica de 20V Máx* 140 mm (5-1/2pulg.) para corte de metal
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com

DeWalt DCS373 Specifications

General

Power Source	Cordless
Voltage	20V
Motor	Brushless
Max Cutting Depth at 45 Degrees	1-5/8 inches
Arbor Size	5/8 inches
Blade Diameter	6.5 inches
Bevel Capacity	50 degrees
Tool Weight	5.84 lbs

Summary

Safety Guidelines

General Power Tool Safety Warnings

Essential safety warnings applicable to all power tools.

WORK AREA SAFETY

ELECTRICAL SAFETY

Precautions for safe use in relation to electrical hazards.

PERSONAL SAFETY

POWER TOOL USE AND CARE

Proper usage and maintenance of power tools.

BATTERY TOOL USE AND CARE

SAFETY INSTRUCTIONS FOR ALL SAWS

Crucial safety rules applicable to all saw operations.

Safety Instructions for All Saws

Further Safety Instructions for All Saws

Additional safety precautions specific to saws.

LOWER GUARD SAFETY INSTRUCTIONS

Instructions for the proper use and maintenance of the lower guard.

Further Safety Instructions for All Saws

CAUSES AND OPERATOR PREVENTION OF KICKBACK

Explains kickback causes and how to prevent it.

Additional Specific Safety Instructions for Circular Saws

Specific safety guidelines for circular saws.

Health and Environmental Precautions

Personal Protective Equipment (PPE)

Important Safety Instructions for All Battery Packs

Specific Safety Instructions for Lithium Ion (Li-Ion)

Safety precautions specific to Li-Ion battery packs.

The RBRCTM Seal

Important Safety Instructions for All Battery Chargers

Crucial safety and operating instructions for battery chargers.

Chargers

Charging Procedure (Fig. 1)

Step-by-step guide for charging battery packs.

INTENDED USE

OPERATION

Installing and Removing the Battery Pack (Fig. 3)

TO INSTALL THE BLADE

TO REPLACE THE BLADE

LOWER BLADE GUARD

Blades

KICKBACK

IMPROPER WORKPIECE SUPPORT

IMPROPER DEPTH OF CUT SETTING ON SAW

Blades

Safety Precautions for Blades

Depth Adjustment (Fig. 7, 8)

Workpiece Support (Fig. 9)

TO SET THE DEPTH OF CUT

Workpiece Support (Fig. 9)

Cutting (Fig. 10, 11)

Maximizing Blade Life