DeWalt DW03050 - Operations; Switching ON;OFF; Clear; Message Codes

Dewalt DW03050
4
EN
Operations
Switching ON/OFF Clear Message Codes
2 sec
Device is
turned OFF.
1x
Undo last action.
If the info icon appears with a
number, observe the instruc-
tions in section "Message
Codes".
Example:
Adjusting measuring reference
Distance is measured from the
front of the device.
1
Distance is measured from the rear
of the device (standard setting).
2
Distance unit setting
0.000m
0'00" 1/16
0 in 1/16
Switch between the
following units:
2 sec