DeWalt DW03050 - Specifications; Product Specifications

16
ENGLISH
Batteries
• When disposing batteries, think of the protection of the
environment.
• Check with your local authorities for an environmentally safe
way of battery disposal.
Specifications
DW03050 DW03101
Range 6in to 165ft
(0.15m to 50m)
6in to 330ft
(0.15m to 100m)
Measuring Accuracy
1
up to 10m: 1/16in (1.5mm)
10m-30m: .078in/5/64in) additional (+/- .15mm/m)
>30m: +/- 0.002in/ft (+/- .2mm/m)
Resolution
2
1/16in (1mm)
Laser Class Class 2 (IEC/EN60825-1: 2014)
Laser Type ≤ 1.0mW @ 630-680nm
Laser Automatic Switch-off 30s
Unit Automatic Switch-off By default, 90s. User can set to 30s, 60s, or 300s
Continuous Measuring Yes
Area Yes
Volume Yes
Pythagoras 2-Point Yes
Endpiece to measure from corners
3
Yes
Battery Life (3 x AAA)
Up to 3000 Measurements (2500 with )
Dimension (H x D x W) 4.72 x 1.91 x 1.02in (120 x 48.5 x 26mm)
Weight (with Batteries) 9.88oz (280g)
Storage Temperature Range 14° F ~ 140° F (-10° C ~ +60 C)
Operating Temperature Range 32° F ~ 104° F (0° C ~ +40° C)
1
Measuring Accuracy depends on the current conditions:
- Under favorable conditions (good target surface and room temperature), up to 33ft (10m).
- Under unfavorable conditions (bright sunlight, a very weak reflecting target surface, or large temperature fluctuations),
the error can increase by to ± 0.003 in/ft (± 0.25mm/m) for distances over 33ft (10m).
2
Resolution is the finest measurement you can see. In inches, that is 1/16". In mm, that is 1mm.
3
Flip open the endpiece at the bottom of the tool when you need to fit the tool into corners or grooves that are not at 180∞
angles. If a corner is at 90∞, the endpiece can be used to hold the tool up against something.