DeWalt DW03050 - Page 17

15
ENGLISH
APPLE LOGO ARE TRADEMARKS OF APPLE INC., REGISTERED IN
THE U.S. AND OTHER COUNTRIES. APP STORE IS A SERVICE MARK
OF APPLE INC., REGISTERED IN THE U.S. AND OTHER COUNTRIES.
GOOGLE PLAY AND THE GOOGLE PLAY LOGO ARE TRADEMARKS
OF GOOGLE INC.
Viewing the Tool's Memory
Up to the last 20 measurements are stored in the tool's memory.
1. Point the tool's laser (Figure A 1) toward a wall or object, and
not toward anyone's eyes.
2. Press (Figure A 3) to turn the tool on and display the
red laser dot.
3. Select as the measurement type.
- Press to display the Main Menu (Figure E 2).
- Press to select .
- Press to display the Measurement Type Menu
(Figure E 3).
- Press the arrow buttons to select (Figure E 4).
- Press .
4. View the last measurement that was taken. Press to scroll
through all the measurements that have been stored in the
tool's memory (up to 20). Press to scroll back.
Clearing the Tool's Memory
You can clear one or more measurements that are currently in
the tool's memory.
1. Point the tool's laser (Figure A 1) toward a wall or object, and
not toward anyone's eyes.
2. Press (Figure A 3) to turn the tool on and display the
red laser dot.
3. Select as the measurement type.
- Press to display the Main Menu (Figure E 2).
- Press to select .
- Press to display the Measurement Type Menu
(Figure E 3).
- Press the arrow buttons to select . (Figure E 4).
- Press .
4. Specify which measurement you want to delete:
- To delete a specific measurement, continue with step 5.
- To delete ALL measurements, skip to step 6.
5. To delete a specific measurement:
- Press or to scroll through the measurements that
have been stored in the tool's memory (up to 20) until
you display the measurement to be deleted.
- Press .
- Select and press to delete the measurement.
6. To delete ALL measurements:
- Press .
- Select and pressvto delete all measurements from
the tool's memory.
Turning Off the Tool
The tool can be turned off in either of these ways:
• Press and hold for 10 seconds. When you release
after 10 seconds, the tool will turn off.
• If you do not use the tool for 90 seconds, it will automatically
turn off.
Calibrating the Tool
Please note that if you do not position the tool correctly for
each step of the calibration process, will appear in red on the
screen (Figure X).
1. Point the tool's laser (Figure A 1) toward a wall or object, and
not toward anyone's eyes.
2. Press (Figure A 3) to turn the tool on and display the
red laser dot.
3. Press to display the Main Menu (Figure E 2).
4. On the Main Menu, select and press .
5. On the Settings Menu (Figure G), select and press .
6. Place the tool with the screen facing upward on a flat, level
surface (Figure X 1).
7. Press .
8. While the tool is still laying on the level surface, turn the tool
180° (Figure X 2).
9. Press .
10. Flip the long side of the tool 90° so it is laying on its side
(Figure X 3).
11. Press .
12. While the tool is still laying on its side, turn the tool 180°
(Figure X 4).
13. Press .
14. Make sure appears on the tool's screen (Figure X 5).
Protecting the Environment
Separate collection. This product must not be disposed of
with normal household waste.
Should you find one day that your DEWALT product needs
replacement, or if it is of no further use to you, do not dispose
of it with household waste. Make this product available for
separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-use
of recycled materials helps prevent environmental pollution and
reduces the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste sites
or by the retailer when you purchase a new product.
DEWALT provides a facility for the collection and recycling of
DEWALT products once they have reached the end of their
working life. To take advantage of this service please return your
product to any authorised repair agent who will collect them on
our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local DEWALT office at the address
indicated in this manual. Alternatively, a list of authorised
DEWALT repair agents and full details of our after-sales service
and contacts are available on the Internet at: www.2helpU.com.