4
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DeWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DeWALT (1-800-433-9258).
Safety
WARNING: To reduce the risk of injury, read the safety manual provided with your product or access it online at www.DeWALT.com.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
WARNING LABELS
For your convenience and safety, the following label is on your laser.
CAUTION: LASER RADIATION - DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.
LASER INFORMATION
The DW08301 laser level is a class 2 laser product and complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser
notice No. 50, dated June 24, 2007.
PRODUCT OVERVIEW
The DW08301 laser level is a self-leveling laser tool that can be used for horizontal (level) and vertical (plumb) alignment and square alignment. This tool comes fully
assembled and has been designed with features that allow for quick and easy set-up. Please read and understand all instructions within this instruction manual in
addition the Safety Manual prior to use.
Specifications
SPECIFICATIONS
Light Source Semiconductor laser diode
Laser Wavelength 630–680 nm visible
Laser Power <1.0 mW (each beam) CLASS 2 LASER PRODUCT
Working Range (Dot) 100ft (30 m)
Accuracy* (Horizontal) ±1/8" @30ft ( ± 3mm/10m )
Accuracy* (Up Beam ±1/8" @30ft (± 3mm/10m)
Accuracy* (Down Beam) ± 1/4" @ 30' (± 6 mm @ 10 m)
Indicators Flashing Laser: tilt range exceeded
Power Source 2 AA size batteries (3.0 V DC)
Operating Temperature 14 °F to 131°F (-10 °C to 55 °C)
Storage Temperature -5 °F to 158 °F (-20 °C to 70 °C)
Environmental Water resistant
ENGLISH
To Next Page
Loading...
