DeWalt DW089 - Assembly and Adjustment; Unpacking

ENGLISH
62
1 Clamp (DW089KD)
1 9 V battery (DW089KD)
1 Kitbox
1 Instruction manual
 • Takethetimetothoroughlyreadandunderstandthismanualprior
to operation.
ASSEMBLY AND ADJUSTMENT
WARNING! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury may result
from staring at the beam.
Unpacking
FITTING THE WARNING LABEL
The safety warnings on the label shown on the laser must be
formulated in the language of the user.
For that purpose, a separate sheet of self-adhesive labels has been
supplied with the tool.
WARNING: Checkthatthesafetywarningsonthelabel
have been formulated in your language.
The warnings should read as follows:
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
 • Ifthewarningsareinaforeignlanguage,proceedasfollows:
– Remove the required label from the sheet.
– Carefully place the label over the existing label.
– Press the label in place.