DeWalt DW124 User Manual

DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Printed in U.S.A. (NOV02-CD-2) Form No. 384086-01
DW124 Copyright © 2002
The following are trademarks for one or more D
EWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of
pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.
DW124/384086-01 11/15/02 12:35 PM Page 2

DeWalt DW124 Specifications

General

Chuck Size	1/2 inch
No Load Speed	0-550 rpm
Voltage	120V
Power Source	Corded
Spindle Thread	1/2 inch - 20 UNF

Summary

Important Safety Instructions

Grounding Instructions

Explains proper grounding procedures for electric tools to prevent shock using 3-prong plugs and adapters.

Safety Instructions For All Tools

Tool Assembly and Operation

Assembling Side Handle

Assembling Bail Handle

Shifting to Desired Speed

Procedure for selecting between high (1200 RPM) and low (300 RPM) speed settings.

Switches

Explanation of the trigger switch for operation and the reversing slide switch.

Operation

General guidelines and steps for operating the drill, including bit insertion and material handling.

Troubleshooting Stalled Drill

Advises on handling a stalled drill, emphasizing immediate trigger release and avoiding repeated attempts to restart.

Product Specifications and Warranty

Maximum Recommended Capacities

Repairs

Advises performing repairs and maintenance at authorized service centers using identical replacement parts.