To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DW217 and is the answer not in the manual?
General| Chuck type | Keyless |
|---|---|
| Hammer drilling | No |
| Torque (max) | 8.2 N⋅m |
| Idle speed (max) | 4000 RPM |
| Drilling diameter in wood (max) | 20 mm |
| Input power | 675 W |
| Output power | 345 W |
| Power source | AC |
Weight and Dimensions| Depth | 247 mm |
|---|---|
| Height | 177 mm |
| Weight | 1200 g |
Details grounding, polarized plugs, cord safety, and outdoor use for electrical tools.
Covers securing workpieces, not forcing tools, and proper handling for safe operation.
Provides specific advice on grip surfaces and handle cleanliness for user safety.
Electronic feature to help control the drill during a stall condition by cycling the motor.
Instructions for starting, stopping, locking the trigger, and disabling the lock-on feature.
Guidance on drilling, including bit selection, securing material, and handling stalls.
