DeWalt DW430 - Technical Data; EC-Declaration of Conformity

12 en - 1
ENGLISH
BELT SANDER DW430/DW431
Congratulations!
You have chosen a DEWALT Power Tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional Power Tool users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 3
Electrical safety en - 3
Mains plug replacement (U.K. & Ireland only) en - 3
Using an extension cable en - 4
Assembly and adjustment en - 4
Instructions for use en - 5
Maintenance en - 5
Guarantee en - 6
Technical data
DW430 DW431
Voltage V 230 230
(U.K. & Ireland only) V 230/115 230/115
Power input W 650 650
Power output W 310 360
Belt speed m/min 320 190 - 320
Sanding surface mm 120 x 75 120 x 75
Belt length mm 533 533
Belt width mm 75 75
Dust extraction dustbag dustbag
Weight kg 3.6 3.6
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
Explosion hazard.
EC-Declaration of conformity
DW430/DW431
DEWALT declares that these Power Tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144:
DW430 DW431
L
pA
(sound pressure) dB(A)* 91 91
L
WA
(acoustic power) dB(A) 99 99
* at the operator’s ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144:
DW430 DW431
< 2.5 m/s
2
< 2.5 m/s
2