19
ENGLISH
BELT SANDER DW432/DW433
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical data
DW432 DW433
Voltage V 230 230
(U.K. & Ireland only) V 230/115 230/115
Power input W 800 800
Belt speed m/min 420 260 - 420
Sanding surface mm 140 x 75 140 x 75
Belt length mm 533 533
Belt width mm 75 75
Weight kg 5.6 5.6
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
Explosion hazard.
EC-Declaration of conformity
DW432/DW433
DEWALT declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014-1, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144:
DW432 DW433
L
pA
(sound pressure) dB(A)* 85.3 85.3
L
WA
(acoustic power) dB(A) 94 94
* at the operator’s ear
Take appropriate measures for the
protection of hearing.
Weighted root mean square acceleration value
according to EN 50144:
DW432 DW433
< 2.5 m/s
2
< 2.5 m/s
2
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany
To Next Page
Loading...
