Need help?Do you have a question about the DeWalt DW531 and is the answer not in the manual?
General| Type | Rotary Hammer |
|---|---|
| Voltage | 120 V |
| Chuck Type | SDS Plus |
| Weight | 6.2 lbs |
| Vibration Control | Yes |
| No Load Speed | 0-1100 RPM |
| Max. Drilling Capacity (Concrete) | 1-1/4 in. |
| Max. Drilling Capacity (Wood) | 1-1/2 inch |
| Max. Drilling Capacity (Steel) | 1/2 in |
Explains the importance of grounding and how to connect the tool for safety.
Guidelines for selecting and using extension cords based on gauge and length.
Requirement for using extension cords specifically intended and marked for outdoor use.
Warning about touching metal parts when drilling near live wires to prevent electric shock.
Step-by-step guide for attaching the side handle to the front position.
Step-by-step guide for attaching the side handle to the rear position.
Procedure for inserting and removing spline drive accessories from the tool holder.
Procedure for inserting and removing SDS-max accessories from the tool holder.
Warning regarding the potential hazards of using non-recommended accessories.
Information about the 30-day no-risk satisfaction guarantee for DEWALT tools.
To Next Page
