Need help?Do you have a question about the DeWalt DW567 and is the answer not in the manual?
General| Voltage | 120V |
|---|---|
| Type | Rotary Hammer |
| Power Source | Corded Electric |
| Amperage | 7.8 Amps |
| No Load Speed | 0-1, 100 RPM |
| Chuck Type | SDS-Plus |
| Max. Steel Drilling | 1/2 inch |
Guidelines for maintaining a clean, well-lit work area and avoiding explosive atmospheres.
Instructions on proper grounding, plug usage, and avoiding electrical hazards with power tools.
Advice on staying alert, dressing properly, avoiding accidental starts, and maintaining balance.
Recommendations on securing workpieces, using the correct tool, and proper tool maintenance.
Special safety rules for operating rotary hammers, including grip, switch usage, and hearing protection.
Step-by-step guide for drilling, including bit selection, pressure, and handling stalls.
Guidance on drilling metal using an SDS to round shank adaptor chuck, including speed and lubricant use.
Instructions for drilling wood, covering bit selection, speed, and using a wood back-up block.
Advice for drilling masonry with carbide-tipped bits, emphasizing constant force and dust flow.
How to adjust the depth rod for precise drilling depths and its usage.
Instructions for cleaning the tool using mild soap and damp cloth, and notes on self-lubricating bearings.
Information on available accessories and a caution against using non-recommended items.
Guidance on where to perform repairs and maintenance for safety and reliability.
Details of the one-year warranty for DEWALT heavy duty industrial tools and satisfaction guarantee.
To Next Page
