DeWalt DW729 User Manual

®
DW728
DW729

DeWalt DW729 Specifications

General

Brand	DeWalt
Model	DW729
Category	Saw
Language	English

Summary

Technical Data

Safety Instructions

Additional Safety Rules for Radial Arm Saws

Specific safety precautions for operating radial arm saws.

Residual Risks

Electrical Safety

Mains Plug Replacement (U.K. & Ireland only)

Instructions for replacing the mains plug in the UK and Ireland.

Assembly and Adjustment

Assembling the Legstand

Instructions for assembling the machine's legstand.

Fitting the Switch Boxes

Guidance on installing the ON/OFF and isolating switch boxes.

Mounting the Height Adjustment Crank

Procedure for attaching the height adjustment crank.

Mounting the Roller Head Assembly

Steps for mounting the roller head assembly.

The Saw Table

Information and assembly for the saw table and extensions.

The Saw Blade

Mounting the Saw Blade

Steps for installing a new saw blade.

Checking Blade Perpendicularity to Table Top

Procedure to ensure the blade is perpendicular to the table.

Checking Crosscut Travel Perpendicularity to Fence

Checking Blade Perpendicularity to Fence

Mounting and Adjusting the Blade Guard Assembly

Adjusting Guard Assembly Controls

Adjusting Riving Knife for Ripping

Adjusting Anti-kickback Fingers for Ripping

Adjusting Riving Knife, Finger Guard & Anti-kickback Fingers for Cross-cutting

Scale Adjustments

Instructions for Use

Switching ON and OFF

Basic Saw Cuts

Cross-cutting

Mitre Cuts

Bevel Cuts

Ripping

Bevel Ripping

Compound Mitre

Dust Extraction

Optional Accessories

The Dado Head

Traverse Control

Mounting the Traverse Control

Maintenance