DeWalt DW715 User Manual

DW715
12" (305 mm) Compound Miter Saw
Scie à onglets mixtes, 305 mm (12 po)
Sierra ingletadora de 305 mm (12")
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
Questions? Visit us at www.dewalt.com
Before returning this product call
1-800-4-DEWALT
IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR D E WALT PURCHASE,
CALL 1-800-4-DEWALT
IN MOST CASES, A D E WALT REPRESENTATIVE CAN RESOLVE
YOUR PROBLEM OVER THE PHONE.
IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.
YOUR FEEDBACK IS VITAL TO THE SUCCESS OF D
E WALT’S QUALITY
IMPROVEMENT PROGRAM.

DeWalt DW715 Specifications

General

Type	Compound Miter Saw
Blade Diameter	12 inches
Amperage	15 A
Weight	42 lbs
Voltage	120V
Power Source	Corded
Bevel Capacity	0° to 48°
Miter Capacity	0° - 50°
Arbor Size	1 in
No Load Speed	4000 RPM

Summary

Safety Guidelines

General Tool Safety

Guidelines for safe operation, tool handling, and personal protection.

Miter Saw Specific Safety

Critical safety rules unique to operating a miter saw.

Workpiece & Material Safety

Precautions for supporting workpieces, handling materials, and dust exposure.

Important Safety Instructions

Essential safety precautions before operating the power tool.

Specifications

Changing or Installing a New Saw Blade

Removing the Blade

Step-by-step guide to safely remove the saw blade.

Installing a Blade

Step-by-step guide for safely installing a new saw blade.

Transporting the Saw

Adjustments

Miter Scale Adjustment

Procedure to accurately align the miter scale for precise cuts.

Bevel Square to Table Alignment

How to ensure the blade is square to the table at 0° bevel.

Miter Pointer Adjustment

Bevel Pointer Adjustment

Adjusting Bevel Stops

Setting the 45° and 33.85° left bevel stops for precise angles.

Fence Adjustment

Guard Operation and Visibility

Controls Overview

Miter Control

Bevel Lock and Stops

Operation

General Operation

Bevel Cuts

How to perform cuts at various bevel angles.

Cutting with Your Saw

Guidelines for cutting wood and general material considerations.

Crosscuts

Body and Hand Position

Clamping the Workpiece

Cutting Specific Projects

Cutting Compound Miters

How to make cuts combining miter and bevel angles.

Cutting Compound Miters

Vernier Scale for Precision

Cutting Base Molding

Vertical Base Molding Cuts

Flat Base Molding Cuts

Cutting Crown Molding

Crown Molding Flat Cuts

Special Cuts

Aluminum Cutting

Maintenance

General Maintenance

Troubleshooting Guide