Need help?Do you have a question about the DeWalt DW712 and is the answer not in the manual?
General| Input power | - W |
|---|---|
| Power source | AC |
| Blade bore | 25 mm |
| Blade diameter | 216 mm |
| Idle speed (max) | 5400 RPM |
Weight and Dimensions| Weight | 19000 g |
|---|
Measured vibration emission levels according to EN 61029 for tool comparison.
Recommended fuse ratings for different regions and voltage supplies.
Explains the severity levels of DANGER, WARNING, CAUTION, and NOTICE signals.
Explains symbols for electric shock and fire risks.
Comprehensive safety practices for operating power tools.
Specific safety precautions for using mitre saws.
Inherent dangers, potential hazards, tool pictograms, and date code.
Lists package contents, advises checking for damage, and identifies parts.
Lists optional accessories and specifies the tool's intended use.
Covers voltage, insulation, plug replacement, and extension cables.
Procedures for unpacking and securely mounting the saw.
Detailed steps for mounting blades and aligning them to fence/table.
Adjusting mitre lock, bevel settings, and fence for accuracy.
Essential pre-operation checks and guidance on using controls and clamps.
Step-by-step guide for making a vertical straight cross cut.
Performing sliding cuts, mitre cross cuts, and bevel cuts.
Tips for cut quality and techniques for cutting frames and boxes.
Cutting moulding, grooving, and connecting dust extraction systems.
Supporting long pieces, transporting, and lubrication.
Instructions for cleaning the saw, its guards, and the kerf plate.
Advice on optional accessories and required saw blade specifications.
Information on product disposal, recycling, and guarantee terms.
To Next Page
