Need help?Do you have a question about the DeWalt DW718XPS and is the answer not in the manual?
General| Type | Compound Miter Saw |
|---|---|
| Blade Diameter | 12 inches |
| Arbor Size | 1 inch |
| Weight | 56 lbs |
| Motor | 15 Amp |
| Voltage | 120V |
| Dust Collection | Yes |
| Laser Guide | Yes |
| Cross Cutting Capacity | 2x14 (Dimensional Lumber at 90°), 2x10 (Dimensional Lumber at 45°) |
| Bevel Range | 0° - 48° (Left and Right) |
Specifications for the DW718/DW718XPS mitre saw, including electrical, capacity, and measurement details.
Explains the meaning of safety signal words (DANGER, WARNING, CAUTION, NOTICE) and electrical symbols.
Declares the product's compliance with relevant EU directives.
Covers work area, personal protection, tool care, and safe operation practices for general electric tools.
Details safety rules specific to mitre saw operations, including blade handling, guards, and accessories.
Instructions for safely unpacking the saw and mounting it to a workbench.
Step-by-step guide for installing a new saw blade correctly.
How to check and adjust the blade to fence and bevel angles for accuracy.
Adjusting the mitre lock rod and bevel clamp system for secure operation.
Essential guidance on operating the saw, including switching, speed setting, and basic cuts.
Covers sliding cuts, mitre cuts, bevel cuts, quality of cut, and body positioning.
Guidance on cutting frames, shadow boxes, and base mouldings.
Instructions for special setups for wide crosscuts and performing groove cuts.
Guidance on cleaning, maintenance, and lubrication requirements for the tool.
Information on product disposal, recycling, and the manufacturer's guarantee.
To Next Page
