Need help?Do you have a question about the DeWalt DW717-XE and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Motor Power | 1600 W |
| Blade Speed | 4000 rpm |
| Blade Bore | 30 mm |
| Dust Extraction | Yes |
| Laser Guide | No |
| Type | Mitre Saw |
| Bevel Capacity | 48° left / 48° right |
| Miter Range | 50° left / 60° right |
| Cutting Capacity at 45°/90° (W x H) | 215 x 120 mm |
Explanation of double insulated construction and its safety implications.
Crucial safety guidelines for operating power tools, covering guards, apparel, and work area.
Specific safety guidelines tailored for miter saw operation.
Guidelines for connecting the miter saw to a power source.
List of optional and recommended accessories for the miter saw.
Specifications and types of saw blades suitable for the miter saw.
Steps and contents for unpacking the miter saw from its carton.
Technical specifications and cutting capacities of the miter saw.
Guide to identifying and understanding the parts of the miter saw.
Instructions for securely mounting the miter saw to a workbench or platform.
Procedure for safely removing the saw blade from the tool.
Procedure for safely installing a new saw blade onto the tool.
Guidelines for safely carrying and moving the miter saw.
How to adjust the miter scale and pointer for accurate angle readings.
Ensuring the blade is square to the table for precise cuts.
Adjusting the bevel pointer and 45° stops for accuracy.
Adjusting bevel stops and fences for accurate and safe operation.
Inspection and replacement of carbon brushes for motor maintenance.
Explanation of main controls like trigger switch and miter/bevel controls.
How to turn the saw on and off using the trigger switch.
Basic guidance for making cuts with the miter saw.
Techniques for making straight, angled crosscuts and bevel cuts.
Factors affecting cut quality and how to achieve smooth results.
Importance and methods of securely clamping workpieces before cutting.
Techniques for creating picture frames, boxes, and trim molding.
Using miter and bevel angles simultaneously for complex cuts.
Techniques for cutting base molding vertically against the fence.
Specific settings and methods for cutting crown molding accurately.
Guidance on specialized cuts for aluminum, plastic, and large materials.
Procedures and safety for cutting aluminum and plastic pipe.
Techniques for cutting oversized material that may not fit under the guard.
Instructions for a special setup to cut wide workpieces.
Procedure for inspecting, replacing, and tensioning the drive belt.
To Next Page
