Need help?Do you have a question about the DeWalt DW788 and is the answer not in the manual?
General| Type | Scroll Saw |
|---|---|
| Motor | 1.3 Amp |
| Blade Length | 5 inches |
| Speed | 400 - 1750 SPM |
| Weight | 56 lbs |
| Throat Depth | 20 inches |
| Cutting Capacity | 2 inches |
| Stroke Length | 3/4 inch |
| Dust Port | Yes |
| Blade Type | Pin-less |
| Table Tilt | 45 degrees left and right |
Identifies the DeWalt DW788 heavy-duty variable speed scroll saw model.
Lists critical safety precautions for operating the scroll saw to prevent personal injury.
Explains proper grounding procedures and extension cord usage for electrical safety.
Covers apparel, eye protection, tool maintenance, accessories, and specific scroll saw safety rules.
Details how to mount the saw and assemble the table and blade.
Guides on installing the blade, adjusting tension, and using the blade tension lever.
Explains the function and adjustment of the material hold-down and air hose features.
Describes the operation of the on/off switch and the variable speed control knob.
Provides instructions for sawing material and adjusting the table for bevel cuts.
Explains how to perform fretwork and make inside cuts using the scroll saw.
Details the overload protector, fuse replacement, and brush inspection/maintenance.
Covers table maintenance, recommended accessories, and cautions regarding their use.
Outlines the full warranty, satisfaction guarantee, and service contact information.
To Next Page
