DeWalt DW735 - Advanced Circuit Breaker Troubleshooting; IF THE BRANCH (HOUSE;SHOP) CIRCUIT BREAKER TRIPS REPEATEDLY:

14
ENGLISH
If the branch (house/shop) circuit breaker trips
repeatedly:
• unplug or turn off other devices sharing the circuit with the
planer OR use the planer on another branch circuit byitself.
• check for dull knives. Dull knives could cause
motoroverloading.
• reduce depth of cut. An overly aggressive cut could cause
motoroverloading.
• drop feed rate to 4.3m/min (14ft/min). A reduction in
feed rate will reduce the load on the motor and prevent
breakertrips.
NOTE: Even under normal loading conditions, other electrical
loads on the same branch circuit may cause the circuit breaker
totrip.