To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DW735X and is the answer not in the manual?
General| Motor Power | 15 Amp |
|---|---|
| Cutterhead Speed | 10, 000 RPM |
| Cuts Per Inch | 96 or 179 CPI |
| Maximum Cutting Depth | 1/8 inch |
| Maximum Planing Width | 13 inches |
| Weight | 92 lbs |
| Maximum Stock Thickness | 6 inches |
| Maximum Stock Width | 13 inches |
| Minimum Stock Thickness | 1/8 inch |
| Number of Knives | 3 |
| Type | Benchtop Planer |
| Voltage | 120V |
| Blade Length | 13 inches |
| Power | 15 Amp |
| Feed Rate | 14 or 26 feet per minute |
| Blade Type | High-speed steel |
| Dust Port Size | 4 inches |
Defines signal words and outlines general operating precautions.
Important safety rules specific to operating the thickness planer.
How to turn the planer on and off, and secure the switch.
Explains the depth adjustment scale and crank for setting thickness.
Guide on how to use the gauge to set the depth of cut.
Step-by-step guide on how to plane material for best results.
Detailed instructions for removing and replacing planer knives.
Procedure for replacing motor brushes on the planer.
How to check and adjust the depth scale for accuracy.
