en - 1 14
ENGLISH
CORDLESS TWO POSITION DRILL/DRIVER
DW920
Congratulations!
You have chosen a DEWALT Power Tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional Power Tool users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 3
Electrical safety en - 4
Mains plug replacement (U.K. & Ireland only) en - 4
Using an extension cable en - 4
Assembly and adjustment en - 4
Instructions for use en - 5
Maintenance en - 5
Guarantee en - 6
Technical data
DW920
Voltage V 7.2
No-load speed min
-1
0-500
Max. torque Nm 9
Tool holder 6.35 mm hex
Weight (without battery pack) kg 0.8
Battery pack DE9057
Voltage V 7.2
Capacity Ah 1.3
Weight kg 0.3
Charger DE9118
Mains voltage V
AC
230
Approx. charging time h 1
Weight kg 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
EC-Declaration of conformity
DW920
DEWALT declares that these Power Tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 50260,
EN 55014-2, EN 55014, EN 60335, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144:
DW920
L
pA
(sound pressure) dB(A)* 68.35
L
WA
(acoustic power) dB(A) 81.35
* at the operator’s ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144:
DW920
0.34 m/s
2
To Next Page
Loading...
Need help?
General
