To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DW995 and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Voltage | 18V |
| Max Torque | 450 in-lbs |
| Chuck Size | 1/2 inch |
| Battery Type | NiCd |
Details on DEWALT 18 Volt battery packs, including replacement and storage advice.
Information regarding the RBRC program for rechargeable battery recycling.
Procedure for charging batteries using 1-hour chargers.
Procedure for charging batteries using 15-minute chargers.
General information on charger modes and battery status indication.
Key considerations and tips for optimal battery charging.
Instructions for inserting and detaching battery packs from the tool.
Explanation of how to use the variable speed trigger for different applications.
How to control the tool's rotation direction and lock the trigger.
How to adjust the clutch for screw driving torque control.
How to shift gears for different speed and torque settings.
Instructions for inserting and removing accessories using the keyless chuck.
How to use and identify tools with a single sleeve chuck.
Step-by-step instructions for removing the chuck from the tool.
Specific techniques and bit recommendations for drilling holes in wood.
Guidelines for drilling metals, including lubricant recommendations.
How to drill into masonry materials using appropriate bits and techniques.
Instructions for using the hammer drill function for masonry work.
How to use the tool for driving screws with torque control.
Routine maintenance procedures for the tool and air vents.
Information on recommended accessories and where to obtain them.
