DeWalt DW991 User Manual

DW952, DW953, DW954, DW958, DW961, DW971, DW972, DW990, DW991
Cordless Adjustable Clutch Driver/Drill
Perceuse-tournevis sans fil à embrayage réglable
Taladro/Destornillador Inalámbrico con Embrague Ajustable
DW975/DW996 Cordless Adjustable Hammerdrills
DW975/DW996 Perceuse-tournevis sans fil à embrayage réglable
DW975/DW996 Destornillador Inalámbrico con Embrague Ajustable
INSTRUCTION MANUAL
GUIDE D´UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Questions? See us on the World Wide Web at www.dewalt.com

DeWalt DW991 Specifications

General

Type	Hammer Drill
Voltage	18V
Chuck Size	13 mm
Impact Rate	0-25, 500 bpm
Speed	0-1, 000 / 0-3, 000 rpm

Summary

General Safety Rules for Battery Operated Tools

Work Area Safety

Work area safety guidelines for power tools.

Electrical Safety Precautions

Safety precautions for electrical components and cords.

Personal Safety Measures

Personal safety measures while operating tools.

Tool Use and Care Guidelines

Guidelines for proper tool operation and maintenance.

Important Safety Instructions for Battery Packs

Read All Instructions for Battery Packs

General instructions for safe handling of battery packs.

The RBRCTM Seal Information

Information about the Rechargeable Battery Recycling Corporation seal.

Important Safety Instructions for Battery Chargers

Save Charger Safety Instructions

Instruction to save safety guidelines for battery chargers.

Charging Procedure and Notes

1 Hour Chargers

Procedure for charging batteries with 1-hour chargers.

15 Minute Chargers

Procedure for charging batteries with 15-minute chargers.

Charging Indicators and Notes

Understanding charging status, indicators, and general notes.

Operation of Battery Packs

Installing and Removing the Battery Pack

Steps to install and remove battery packs from tools.

Variable Speed Switch

Forward/Reverse Control Button

Torque Adjustment Collar

Keyless Chuck Operation

Chuck Installation

Operation as a Drill

Drilling Guidelines

General guidelines and best practices for drilling.

Operation as a Screwdriver

Maintenance Procedures

Repairs and Service

Full Warranty Information

30 Day Satisfaction Guarantee

Free Warning Label Replacement