DeWalt DW929 - Page 20

20
ENGLISH
CORDLESS DRILL/DRIVER
DW927/DW928/DW929/DW956/DW957
Congratulations!
You have chosen a DEWALT power tool. Years of experience, thorough product development and innovation
make DEWALT one of the most reliable partners for professional power tool users.
Technical data
DW927 DW928 DW929 DW956 DW957
Voltage V 12 14.4 18 12 14.4
No load speed
1st gear min
-1
0-400 0-400 0-400 0-400 0-400
2nd gear min
-1
0-1,400 0-1,400 0-1,400 0-1,400 0-1,400
Max. torque Nm 32 35 40 35 40
Chuck capacity (K2 models) mm 10 10 10 13 13
Maximum drilling capacity in steel/wood (K2 models) mm 10/25 10/32 10/38 13/28 13/35
Chuck capacity (K2H models) mm 10 10 - 13 13
Maximum drilling capacity in
steel/wood (K2H models) mm 10/25 10/32 - 13/28 13/35
Weight kg 1.6 1.7 1.9 1.9 2.1
NiCd battery pack DE9074 DE9094 DE9098
Voltage V 12 14.4 18
Capacity Ah 1.3 1.3 1.3
Weight kg 0.55 0.6 0.87
NiCd battery pack DE9071 DE9091
Voltage V 12 14.4
Capacity Ah 2.0 2.0
Weight kg 0.65 0.7
NiMH battery pack DE9086 DE9087
Voltage V 12 14.4
Capacity Ah 2.0 2.0
Weight kg 0.65 0.7
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Charger DE9107 DE9116 DE9118
DE9108
Mains voltage V
AC
230 230 230
Approx. charging time min 60 60 60
Weight kg 0.4 0.4 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs
EC-Declaration of conformity
DW927/DW928/DW929/DW956/DW957
DEWALT declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014, EN 50260, EN 60335, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.