Need help?Do you have a question about the DeWalt DWD024S and is the answer not in the manual?
Key specifications and performance data for the drill models.
Explains the meaning of safety signal words like DANGER, WARNING, CAUTION, and NOTICE.
Important safety information applicable to all power tool operations.
Advice on staying alert, using protective equipment, and preventing unintentional starting.
Guidance on proper hand position, tool usage, and avoiding overreaching.
Ensuring dust collection is used and wearing appropriate clothing and gloves.
Using the right tool for the job, proper speed selection, and avoiding misuse.
Instructions on tool maintenance, keeping cutting tools sharp, and safe storage.
Guidance on having the power tool serviced by a qualified repair person with identical parts.
Specific safety rules for percussion drilling, including ear protection and auxiliary handle use.
Instructions for inserting and removing drill bits using keyed or keyless chucks.
Procedures for removing and installing a keyed chuck securely.
Procedures for removing and installing a keyless chuck for convenience.
How to start, stop, and control drill speed using the variable speed trigger.
Guidance on holding the tool correctly with both hands for maximum control.
Safety warnings for drilling, including workpiece anchoring and bit selection.
Techniques for drilling wood, including speed, pressure, and using backup blocks.
Techniques for drilling metal, including speed, pressure, lubricant, and pilot holes.
Techniques for drilling masonry using carbide-tipped bits and constant force.
Information about the automatic brush system that stops the drill when brushes wear out.
Instructions for cleaning the tool safely using dry air and approved protective gear.
Guidance on proper disposal of the product and recycling used materials.
Instructions for adjusting the side handle for right-hand or left-hand users.
How to use the lever for withdrawing bits from tight holes and removing screws.
How to select between drill-only and hammer-only modes.
Steps to adjust the depth rod for controlling drilling depth.
Ensuring the power supply matches the tool's voltage rating.
Guidelines for selecting and using appropriate extension cables.
Detailed steps for inserting/removing bits and managing keyed/keyless chucks.
Selecting between drill-only and hammer-only modes for different materials.
Procedure for fitting and adjusting the depth rod for precise drilling depth.
How to operate the trigger switch for starting, stopping, and speed control.
Correct hand placement on the tool for safe and effective drilling operations.
Safety and technique advice for drilling, including workpiece security and stall prevention.
Specific methods for drilling wood, including speed, pressure, and chip clearing.
Techniques for drilling metal, including speed, pressure, lubricant, and chip flow.
Methods for drilling masonry using carbide-tipped bits and consistent force.
Description of the automatic brush system that protects the motor.
Guidelines for cleaning the tool safely using approved methods and protective gear.
Warning and caution regarding the use of non-DEWALT accessories.
Guidance on separate collection and disposal of the product for recycling.
Information about the advanced brush system and replacement.
Statement that the power tool requires no additional lubrication.
Instructions for cleaning the tool using dry air and protective equipment.
To Next Page
General
