Need help?Do you have a question about the DeWalt DWD024 and is the answer not in the manual?
General| Chuck type | Key |
|---|---|
| Adjustable speed | Yes |
| Idle speed (max) | 2800 RPM |
| Impact rate (high speed) | 47600 bpm |
| Drilling diameter in wood (max) | 25 mm |
| Drilling diameter in steel (max) | 10 mm |
| Drilling diameter in concrete (max) | 16 mm |
| Input power | 650 W |
| Power source | AC |
| Product color | Black, Silver, Yellow |
Weight and Dimensions| Weight | 16500 g |
|---|
Defines the meaning of DANGER, WARNING, CAUTION, NOTICE signal words used in the manual.
Provides essential safety rules for operating any power tool, covering work area, electrical safety, and personal safety.
Instructions on how to install and adjust the side handle for optimal grip and control.
Guides on selecting the appropriate mode for different drilling tasks, like wood or masonry.
Instructions for using both keyed and keyless chucks for bit insertion and removal.
Details on how to attach and adjust the depth rod for accurate hole depth.
Initial advice and precautions to take before starting to use the power tool.
Demonstrates the correct way to hold the tool with both hands for maximum control and safety.
Explains trigger switch use, variable speed control, and continuous operation.
Comprehensive guidance on how to perform drilling operations safely and effectively.
Information on the automatic brush system and when replacement by an agent is needed.
States that the power tool requires no additional lubrication.
Instructions on how to clean the tool safely, including warnings about solvents.
Advice on using DEWALT recommended accessories for safety and performance.
Guidelines for proper disposal and recycling of electrical products.
To Next Page
