EasyManua.ls Logo

DeWalt DWE4202 - Maintenance; Optional Accessories; Protecting the Environment

DeWalt DWE4202
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
English
dry compressed air into the ventilation
slots inaccordance with the below
maintenanceinstructions.
MAINTENANCE
Your D
e
WALT power tool has been designed
to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regularcleaning.
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories. Before
reconnecting the tool, depress and
release the trigger switch to ensure that
the tool is off.
Pop-off Brushes
The motor will be automatically shut off indicating
that the carbon brushes are nearly worn out and
that the tool needs servicing. The carbon brushes
are not user-serviceable. Take the tool to an
authorised D
e
WALT repairagent.
Lubrication
Your power tool requires no additionallubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into aliquid.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
e
WALT, have not
been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury,
only D
e
WALT recommended accessories
should be used with thisproduct.
Consult your dealer for further information on the
appropriateaccessories.
Max.
[mm]
[mm]
Min.
Rotation
[min.
-1
]
Periphical
speed
[m/s]
Threaded
hole length
[mm]
D b d
d
D
b
115 6
22,23
11,500 80 -
125 6
22,23
11,500 80 -
D
115 - - 11,500 80 -
125 - - 11,500 80 -
D
d
b
75 30 M14 11,500 45 20.0
D
115 12 M14 11,500 80 20.0
125 12 M14 11,500 80 20.0
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
householdwaste.
Should you find one day that your D
e
WALT product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separatecollection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.

Other manuals for DeWalt DWE4202

Related product manuals