DeWalt DWE4203 - Technical Data

31
ENGLISH
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
Fuses:
Europe 230V tools 10 Amperes. mains
U.K. & Ireland 230V tools 13 Amperes. in plugs
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
English (original instructions)
SMALL ANGLE GRINDERS
DWE4203, DWE4213, DWE4233, DWE4263
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DWE4203 DWE4213 DWE4233 DWE4263
Voltage V
AC
230 230 230 230
Type 3 3 3 1
Power input W
1010 1200 1400 1400
No-load/rated speed min
-1
11,000 11,500 11500 10000
Wheel diameter mm
125 125 125 125
Wheel thickness (max) mm
6.0 6.0 6.0 6.0
Spindle diameter
M14 M14 M14 M14
Spindle length mm
18.5 18.5 18.5 18.5
Weight kg
1.85 1.85 1.85* 2.5*
* weight includes side handle and guard
Noise and vibration total values (triax vector sum) according to EN 60745-2-3:
L
PA
(emission sound pressure level) dB(A) 92.0 92.0 92.0 –
L
WA
(sound power level) dB(A) 103.0 103.0 103.0 –
K (uncertainty for the given sound level) dB(A) 3 3 3 –
Surface grinding
Vibration emission value a
h,AG
= m/s² 8.3 8.3 8.3 –
Uncertainty K = m/s² 1.5 1.5 1.5 –
Disc sanding
Vibration emission value a
h,DS
= m/s² 3.0 3.0 3.0 –
Uncertainty K = m/s² 1.5 1.5 1.5 –

CAUTION: Working with the wire brush or the abrasive cutting can lead to different vibration levels!