DeWalt DWE4205 User Manual

9
English
Package Contents
The package contains:
1 Angle grinder
1 Guard
1 Side handle
1 Flange set
1 Hex key
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
duringtransport.
• Take the time to thoroughly read and
understand this manual prior tooperation.
Description (fig. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or personal
injury couldresult.
A. Spindle lock button
B. Spindle
C. Side handle
D. Backing flange
E. Threaded locking flange
F. Guard
G. Slider switch (DWE4204, DWE4205, DWE4206,
DWE4207, DWE4214, DWE4215, DWE4216,
DWE4217)
H. Paddle switch (DWE4202, DWE4203,
DWE4213)
I. Lock-off lever (DWE4202, DWE4203,
DWE4213)
J. Guard release lever
K. Dust ejection system
INTENDED USE
The DWE4202, DWE4203, DWE4204, DWE4205,
DWE4206, DWE4207, DWE4213, DWE4214,
DWE4215, DWE4216 and DWE4217 heavy-duty
small angle grinders have been designed for
professional grinding, sanding, wire brushing and
cuttingapplications.
DO NOT use grinding wheels other than centre
depressed wheels and flapdiscs.
DO NOT use under wet conditions or in the
presence of flammable liquids orgases.
These heavy-duty angle grinders are professional
power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use thistool.
of the wire wheel or brush with the guard.
Wire wheel or brush may expand in diameter
due to work and centrifugalforces.
Additional Safety Rules for Grinders
• Threaded mounting of accessories must match
the grinder spindle thread. For accessories
mounted by flanges, the arbor hole of the
accessory must fit the locating diameter of
the flange. Accessories that do not match the
mounting hardware of the power tool will run
out of balance, vibrate excessively and may
cause loss ofcontrol.
• The grinding surface of the centre depressed
wheels must be mounted below the plane of
the guard lip. An improperly mounted wheel
that projects through the plane of the guard lip
cannot be adequatelyprotected.
WARNING: We recommend the use of
a residual current device with a residual
current rating of 30mA or less.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment ofhearing.
– Risk of personal injury due to flyingparticles.
– Risk of burns due to accessories becoming hot
duringoperation.
– Risk of personal injury due to prolongeduse.
– Risk of dust from hazardoussubstances.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
DATE CODE POSITION
The date code, which also includes the year of
manufacture, is printed into thehousing.
Example:
2015 XX XX
Year of Manufacture

DeWalt DWE4205 Specifications

General

Brand	DeWalt
Model	DWE4205
Category	Grinder
Language	English