To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DWE4517 and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Power Source | Corded Electric |
| Wheel Diameter | 7 inches |
| Weight | 14.5 lbs |
| Spindle Thread | 5/8-11 |
| Lock-On Switch | Yes |
| Amperage | 15 Amps |
| Spindle Lock | Yes |
| Switch Type | Paddle |
| Voltage | 120 V |
Explains the severity levels associated with signal words like DANGER, WARNING, CAUTION, and NOTICE.
Provides essential safety instructions applicable to all power tools to prevent injury.
Outlines essential personal safety measures, including staying alert, using PPE, and preventing unintentional starting.
Provides guidelines on how to properly use, maintain, and care for power tools to ensure safety and longevity.
Covers common safety warnings applicable to all operations like grinding, sanding, and cutting.
Specific safety precautions for various operations including accessory selection, speed ratings, and personal protective equipment.
Covers safe practices during operation, including cord management, tool handling, cleaning, and using the side handle.
Explains kickback phenomena and provides detailed precautions to avoid it during operation.
Specific safety advice for grinding and abrasive cutting operations, emphasizing guard usage and wheel selection.
Provides specific safety advice for abrasive cutting-off operations, including wheel jamming and workpiece support.
Details safety precautions for sanding operations, focusing on disc size and proper application.
Highlights safety considerations for polishing operations, particularly regarding attachment strings.
Safety advice for wire brushing, including bristle hazards and guard interaction.
General safety rules for grinders, covering accessory security, workpiece support, and vibration.
Addresses risks associated with dust exposure, including carcinogens and reproductive harm, and necessary precautions.
Instructions for mounting Type 27 grinding wheels and sanding flap discs, including guard information.
Step-by-step instructions for installing and removing hubbed wheels onto the spindle.
Instructions for mounting depressed center, Type 27 grinding wheels using accessory flanges.
