DeWalt DWE402 User Manual

DWE402, DWE402N, DWE402G, DWE4214, DWE4222, DWE4222N, DWE4224
Heavy-Duty Small Angle Grinder
Petites meuleuses angulaires de service intensif
Esmeriladoras angulares pequeñas para trabajo pesado
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D
e
WALT • www.dewalt.com
Page dimensions: 8.5 x 5.5 in

DeWalt DWE402 Specifications

General

Quantity per pack	1 pc(s)

Summary

Safety Guidelines

General Power Tool Safety Warnings

Read all safety warnings and instructions to avoid electric shock, fire, and serious injury.

Personal Safety and Tool Care

Personal Safety

Stay alert, use PPE, prevent unintentional starting, and dress appropriately.

Power Tool Use and Care

Proper use and care of power tools to ensure safety and prevent accidental starts or damage.

General Operation Safety Instructions

Safety for Grinding, Sanding, and Cutting

General safety precautions for grinding, sanding, wire brushing, polishing, and cutting operations.

Kickback Prevention

Grinding and Cutting Specific Safety

Additional Safety Warnings Specific for Abrasive Cutting-Off Operations

Specific safety advice for abrasive cutting-off operations, including guard usage and avoiding jamming.

Sanding, Polishing, and Wire Brushing Safety

Polishing Operations Safety

Guidelines for safe operation when polishing, focusing on attachment strings.

Wire Brushing Operations Safety

Precautions for wire brushing, including bristle hazards and guard use.

Assembly and Adjustments

Guard Mounting and Adjustment

Type 27 One-Touch™ Guard Installation (Fig. 3)

Step-by-step guide for mounting, adjusting, and removing the keyless guard.

Lanyard Connection and Switches

Switch Operation (Fig. 4)

Information on paddle switches and lock-off levers for safe operation.

Switch Types and Accessory Mounting

Mounting Grinding Wheels and Flap Discs

Guidance on mounting specific types of discs and wheels.

Mounting and Grinding Wheel Use

Mounting Non-Hubbed Wheels (Fig. 8, 9)

Surface and Edge Grinding (Fig. 10, 11)

Sanding Flap Discs and Backing Pads

Surface Finishing with Sanding Flap Discs (Fig. 12)

Mounting Sanding Backing Pads (Fig. 1, 13)

Sanding Pad Use and Hubbed Wheel Mounting

Using Sanding Backing Pads (Fig. 14)

Mounting Hubbed Wheels (Fig. 15)

Wire Brush and Wheel Mounting

Mounting and Using Wire Brushes and Wire Wheels

Mounting Wire Cup Brushes and Wheels

Wire Brush Use and Cutting Wheel Mounting

Using Wire Cup Brushes and Wheels (Fig. 16, 17)

Mounting Type 1/Type 41 Cutting Wheels

Cutting Wheel Use and Guard Mounting

Mounting and Removing Type 1 Guard (Fig. 18)

Mounting Type 1 or Type 41 Cutting Wheels

Maintenance and Cleaning