DeWalt DWE4012 User Manual

DWE4012
Small Angle Grinder
Petite meuleuse angulaire
Esmeriladora angular pequeña
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com

DeWalt DWE4012 Specifications

General

Brand	DeWalt
Model	DWE4012
Category	Grinder
Language	English

Summary

Definitions: Safety Guidelines

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way.

PERSONAL SAFETY

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application.

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

Safety Warnings Common for Grinding, Sanding, Wire Brushing, Polishing or Abrasive, Cutting-Off Operations

Read all safety warnings, instructions, illustrations and specifications provided with this power tool.

ASSEMBLY AND ADJUSTMENTS

ATTACHING SIDE HANDLE (FIG. 2)

The side handle can be fitted to either side of the gear case in the threaded holes.

Rotating the Gear Case (Fig. 3)

Instructions on how to rotate the gear case to a desired position.

Accessories and Attachments

4-1/2" (114.3 mm) Cutting Wheels

Details about cutting wheels and their types.

Sanding Discs

Information about sanding discs and their components.

4-1/2" (114.3 mm) Sanding Flap Discs

Details about sanding flap discs and their components.

OPERATION

Guards and Flanges

Importance of choosing correct guards and flanges for accessories.

Switches

Cautionary notes about holding the tool firmly.

Mounting and Using Depressed Center Grinding Wheels and Sanding Flap Discs

PADDLE SWITCH (FIG. 6)

Instructions for operating the paddle switch and lock-off lever.

LOCK-ON BUTTON (FIG. 6)

How to use the lock-on button for extended use.

SPINDLE LOCK (FIG. 7)

How to use the spindle lock button for installing/removing wheels.

MOUNTING AND REMOVING HUBBED WHEELS (FIG. 8)

Steps for mounting and removing hubbed wheels.

MAINTENANCE

Cleaning

Instructions on how to clean the tool's air vents.