DeWalt DWE4011 User Manual

DWE4011
Heavy-Duty Small Angle Grinder
Petites meuleuses angulaires de service intensif
Esmeriladoras angulares pequeñas para trabajo pesado
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com

DeWalt DWE4011 Specifications

General

Quantity per pack	1 pc(s)

Summary

Definitions: Safety Guidelines

WORK AREA SAFETY

ELECTRICAL SAFETY

Precautions for safe electrical connection and use of power tools.

General Power Tool Safety Warnings

PERSONAL SAFETY

Advice on staying alert, using personal protective equipment (PPE), and preventing unintentional starts.

POWER TOOL USE AND CARE

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

Safety Warnings Common for Grinding, Sanding, Wire Brushing, Polishing or Abrasive, Cutting-Off Operations

Safety advice common to multiple operational modes of the tool.

Causes and Operator Prevention of Kickback

Explanation of kickback and methods to prevent it during operation.

Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations

Specific safety rules for grinding and cutting tasks.

Additional Safety Warnings Specific for Abrasive Cutting-Off Operations

Safety Warnings Specific for Sanding Operations

Safety Warnings Specific for Polishing Operations

Safety Warnings Specific for Wire Brushing Operations

Additional Safety Rules for Grinders

Mounting Guard

MOUNTING AND REMOVING (TYPE 27) ONE-TOUCH™™ GUARD

OPERATION

Guards and Flanges

Switches

SLIDER SWITCH (FIG. 6)

SPINDLE LOCK (FIG. 7)

Mounting and Using Depressed Center Grinding Wheels and Sanding Flap Discs

SURFACE GRINDING WITH GRINDING WHEELS (FIG. 9)

EDGE GRINDING WITH GRINDING WHEELS (FIG. 10)

SURFACE FINISHING WITH SANDING FLAP DISCS (FIG. 11)

Mounting and Using Wire Brushes and Wire Wheels

USING WIRE CUP BRUSHES AND WIRE WHEELS (FIG 14, 15)

Mounting and Using Cutting (Type 1) Wheels

MOUNTING CLOSED (TYPE 1) GUARD (FIG. 16-18)

MAINTENANCE