DeWalt dwe6411 User Manual

4
English
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and instructions Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
Congratulations!
You have chosen a
DeWALT
tool. Years of
experience, thorough product development and
innovation make D
e
WALT one of the most reliable
partners for professional power tool users.
Technical data
DWE6411
Voltage V
AC
220-240
Power input W 230
Pad size mm 108 x 115
Orbits min
-1
14,000
Orbit mm 1.6
Weight kg 1.3
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes risk of explosion.
WARNING: To reduce the risk of injury,
read the instruction manual.
1/4 SHEET SANDER
DWE6411
English (original instructions)

DeWalt dwe6411 Specifications

General

Sound power level	93 dB
Sound pressure level	82 dB
Sound level uncertainty	3 dB
Oscillating orbit diameter	1.6 mm
Idle oscillation rate (max)	14000 OPM
Power	230 W
Uncertainty K	1.5 m/s²
Maximum paper size	140 x 115 mm
Vibration emission	4 m/s²
Product color	Black, Yellow
Type of sander	Orbital sander
Power source	AC

Weight and Dimensions

Depth	160 mm
Height	135 mm
Weight	1280 g
Sanding plate size (WxD)	108 x 115 mm