DeWalt DWP849X User Manual

DWP849X

DeWalt DWP849X Specifications

General

Power source	AC
AC input voltage	- V
Product color	Black, Yellow
Idle speed (max)	3500 RPM
Polishing pad diameter	230 mm

Weight and Dimensions

Depth	480 mm
Height	135 mm
Weight	3000 g

Summary

General Power Tool Safety Warnings

Read all safety warnings and all instructions

Emphasizes reading all safety information before use.

ELECTRICAL SAFETY

PERSONAL SAFETY

Advice on staying alert, using PPE, and preventing unintentional starting.

POWER TOOL USE AND CARE

ADDITIONAL SPECIFIC SAFETY RULES

Safety Instructions for All Operations

Specific safety warnings for all operations using the tool.

Causes and Operator Prevention of Kickback

Explains kickback and how to prevent it.

Explains kickback and how to prevent it.

Safety Warnings Specific for Polishing Operations

Do not allow any loose portion of the polishing bonnet...

Description (fig. 1)

WARNING: Never modify the power tool or any part of it.

Strong warning against modifying the tool or its parts.

INTENDED USE

Specifies the designed purpose and applications for the polisher.

Electrical Safety

WARNING: 120 V units have to be operated via a fail-safe isolating transformer...

Safety requirement for 120V units using a specific transformer.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of injury, turn unit off and disconnect...

Crucial safety warning before performing adjustments or changes.

Spindle Lock Button (fig. 1)

NOTICE: To reduce the risk of damage to the tool, do not engage the spindle lock...

Attaching and Removing Polishing Pads (fig. 3)

WARNING: To reduce the risk of serious personal injury, do not allow any loose portion of the polishing bonnet...

Safety warning about loose bonnet parts causing entanglement.

TO ATTACH POLISHING PAD WITH RUBBER BACKING PAD (FIG. 3A)

TO ATTACH POLISHING PAD WITH HOOK AND LOOP BACKING PAD (FIG. 3B)

OPERATION

WARNING: Always observe the safety instructions and applicable regulations.

Reminder to follow all safety instructions and regulations.

WARNING:

Proper Hand Position (fig. 4)

WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown.

Emphasizes using the correct hand position for safety.

WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction.

Advises holding the tool securely to anticipate sudden reactions.

Variable Speed Trigger Switch (Fig. 1)

Explains the function and operation of the variable speed trigger switch.

TRIGGER LOCKING BUTTON

Speed Control Wheel (Fig. 1)

Describes how to adjust and use the speed control wheel.

ELECTRONIC SPEED CONTROL

Details the electronic speed control feature and its operation.

Polishing (fig. 4)

WARNING: High-speed rubbing action of the polishing bonnet upon the workpiece surface can build a static charge...

Warning about static charge buildup during high-speed polishing.

MAINTENANCE

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect...

Crucial safety warning before performing maintenance.

Optional Accessories

WARNING: Since accessories, other than those offered by DEWALT, have not been tested...

Warning about using non-DEWALT accessories due to potential hazards.